Payment & Shipping Terms:
|Inlet Diameter:||Ф0.8mm-Ф1.4mm||Outlet Diameter:||Ф0.1mm-Ф0.6mm|
|Usage:||Drawing And Annealing||Max Line Speed:||1500m/min|
|Product Name:||Non Standard Wire Drawing Machine||After-sale Service:||Engineer Available To Overseas|
HXE-22DT Fine copper wire drawing machine with Annealing and Double spoolers
22DT Fine copper wire drawing machine with annealing and double spoolers is used to draw and annealing single bare copper wire from 0.8mm-1.4mm to 0.1mm-0.6mm.
II. Main Technical parameters
1. Usage single bare copper wire drawing and annealing
2. Inlet size Ф0.8mm-Ф1.4mm
3. Outlet size Ф0.1mm-Ф0.6mm
4. Machine speed/max 1500m/min
5. Die number 22, Dies size 25mm×8-10mmT, Slip ratio 15.5%+8%
6. Wire drawing mode standing-mode and 4axes
7. Drive: by Inverter control, Brand Inovance, Chinese famous brand.
8. Main motor 15KW, Spooler motor 5.5KW*1set/2sets
9. Annealing voltage DC55V/max
10. Annealing current DC600A/max
11. Annealing power 33KVA
12. Annealing method D.C three-section annealer
13. Quantity of steam 8kg/h
14. Capacity of compressed air 0.4-0.6Mpa,15L/min
15. Demand Water quantity for annealing and coolant 150L/min
16. Machine frame welded by steel plate
17. Transmission By Timing belts
18. Capstan ceramic plasma
19. Lubricating system Spray
20. Bobbin size 300mm, loading capacity :50kg/max (Can be customized)
21. Bobbin loading &unloading type shaft type
22. Traversing unit 110W synchros motor, width: 270mm/max
23. Bobbin controlling Fixed by Screw
24. Brake 20KG-M magnetic brake
25. Operation panel &control cabinet 1000×800×1800mm
26. Machine dimension 2100mm*1600mm*1700mm
27. Machine weight 3200KG
|1. Pay-off shelf||1 set|
|2. HXE-22DT Drawing&Annealing machine||1 set|
|3. Electrical control system||1 set|
|4. Steam generator||1 set|
|5. Lubrication Tank and Pump||Optional|
|6. Spare parts||As per List|
|7. Operation Manual, Inverter Manual|
IV. The structure and principle of the machine
4-1. The annealing part, is three-section annealing, consist of Preheating section, annealing section and drying section. The fix speed capstan of drawing, the annealing capstans, are driven by the same motor, through belts, so the speed of drawing, speed of annealing, is the same, make sure no wire break.
4-2. The annealing capstans, are access to positive and negative power, make the wire pass through the annealing capstans with current, by short-circuiting, to preheat, anneal and dry.
4-3. The annealing current and voltage, by auto tracking the drawing speed to auto adjust.
4-4. To cooling fast to achieve the annealing, the annealing capstan is under the cooling water. There is a cooling tank at the bottom of the machine, cooling water, better use fat content of 0.5% emulsion. The pump shall pump the cooling water through the pipe and the switch to the annealing door. Adjust the cooling water switch to make sure the water is in certain height.
4-5. To make sure the wire while annealing, no Oxidation, there is a steam-in protection pipe, connect the pipe to the Steam generator, to use the steam to protect the wire from the oxidation.
4-6. In the exit of the drying section, there is a blowing device. In the device, shall have two dies. Connect the air compressor to the air compress input pipe, then out by the blowing device, adjust the switch, to make all the left water of the drying part, on the surface of the wire, blow away.
V. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.