Payment & Shipping Terms:
|Inlet Diameter:||2.6mm-3.5mm||Outlet Diameter:||0.4mm-1.6mm|
|Main Motor:||55KW||Max Line Speed:||2000mpm|
|After-sale Service:||Engineer Available To Overseas||Product Name:||Intermediate Wire Drawing Machine|
HXE-17DST Intermediate copper wire drawing machine with annealer
HXE-17DST Intermediate copper wire drawing machine with annealer is used to draw and anneal single bare copper wire from 2.6mm-3.5mm to 0.4mm-1.6mm.
II. Compositions of equipments
|1. Pay-off(Wire Tangle Auto Stop)||1 set|
|2. HXE-17DS Drawing machine||1 set|
|3. HXE-TH250 Annealing machine||1 set|
|4. HXE-180 Tension controller||1 set|
|5. HXE-SX500 Single or Double spoolers||1 set|
|6. Electric cabinet||2 set|
|7. Operation panel||1 set|
|8. Steam generator||1 set|
|9. Gear Oil Lubrication System||1 set|
|10. Spare parts||1 set|
III.Main technical parameters
|Control system||Traditional analog type/digital control with production record|
|Max line speed||1200||2000||1800|
|Frame||Iron cast||Welded by steel plate|
|Max capstan diameter||260mm||250mm||280mm|
|Fix speed capstan diameter||260mm||250mm||280mm|
|Spooler bobbin size||400-630mm|
|Bobbin loading&unloading type||Double end thimble|
|Transmission type||By chain||By precision helical gears|
|Traversing unit||90W belt type redule motor|
|Brake||Magnetic brake/Disc brake|
|Revise system||PID Synchronous control spooler|
|Detecting device||Weight balance by swing arm|
|Tension control||By air pressure adjust|
|Annealing method||DC.Three-section annealing|
|Max annealing current||DC1200A||DC2000A||DC2000A|
|Max annealing voltage||DC50V||DC50V||DC50V|
|Cooling water capacity||300L/min||400L/min||500L/min|
|Capacity of compressed air||0.4~0.6Mpa,30L/min||0.4~0.6Mpa,50L/min||0.4~0.6Mpa,50L/min|
IV. Shipping & Installation
There are two lifting rings on the drawing machine, four on then annealing machine.
4-2. Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center line.
When concrete is drying, adjust center line again and fix the bolts.
Before adjusting, check and clean all parts.
V. Advantage and after-self service
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.