Payment & Shipping Terms:
|Outlet Diameter:||1.2mm-4mm||Product Name:||Rod Breakdown Machine|
|Drawing Material:||Copper / Copper Alloy||Power Source:||380V/50-60HZ(Customized)|
|After-sale Service:||Engineer Available To Overseas||Main Motor:||280KW|
HXE-450/13DL Large Copper wire drawing machine
I. Quick Description
HXE-450/13DL Large Copper wire drawing machine is used to draw single bare copper wire from 8mm to 1.2mm-4.5mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.
II. Componenets of equipment
|1. Cantilever Pay-off shelf||1|
|2. HXE-450/13DL Main drawing machine||1|
|4. HXE-180 Tension controller||1|
|6. HXE-SX630 Double spoolers||1|
|7. Electrical cabinet||1|
|8. Operation panel / With PLC&Touching screen||1|
III. Main technical parameters
|3. Diameter of capstans||450mm|
|4. Speed||1500m/min, Capacity say 1.2mm, 780kg per hour|
|5. Slip ratio||1.4-1.2 decrease|
|6. Quantity of capstan||13|
|7. Capstan||Tungsten carbide (With wire threading function)|
|8. Quick dies change||Available / Require less dies|
|9. Main motor||DC280KW, with DC Controller|
|10. Fix speed motor||DC75KW, with DC Controller|
|12. Noises of machine||≤85 db|
|13. Protection cover||Motor transmission cover installed|
|14. Others||Heat exchanger for Gear oil is provided|
|15. Others||All main pipes are provided|
|16. Others Gear oil station system is provided, including: Pump, Gear oil tank, Pipes, Oil Pressure Gauge, Signal wire.|
|17. Others Heat exchanger for Lubrication oil and Heat exchanger for cooling water, no need. You need prepare one Underground Tank for Lubrication Oil recycle, one Water Tower for Cooling Water recycle.|
IV. After sale service
Warranty: after shipping, machine part one year, electrical parts six months
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
V. Preparation before working
5-1.Check all parts lubrication conditions,
5-2.Check drawing lubrication oil, cooling water, steam, air pressure.
5-3.After checking, connect to power, according to the Electrical drawing, use foot switch, to make the machine operating in low speed (under 4m/s), if no Abnormal, then can begin to work.