Payment & Shipping Terms:
|Inlet Diameter:||9.5mm||Outlet Diameter:||1.7mm-4.2mm|
|Main Motor:||160KW||Power Source:||380V/50-60HZ|
|After-sale Service:||Engineer Available To Overseas||Product Name:||Rod Breakdown Machine|
HXE-400/13DL aluminium wire rod breakdown machine
HXE-400/13DL Aluminium rod breakdown machine is used to draw single bare aluminium wire from 9.5mm to 1.7mm-4.2mm.The drawing capstans are arranged in a line that are able to work continuously with drawing speed and electrical control can be matched with each other.
II. Compositions of equipment
|1. Pay-off shelf||1|
|2. HXE-400/13DL Main drawing machine||1|
|3. HXE-180 Tension controller||1|
|4. HXE-SX630 Double spoolers||1|
|5. Electrical cabinet||1|
|6. Operation panel||1|
|7. Gear Oil System||1|
|8. Spare parts|
III. Main technical parameters
|3. Diameter of capstans||400mm|
|4. Speed||1000m/min; Capacity say 1.7mm, 360KG.|
|5. Slip ratio||1.42-1.2|
|6. Quantity of capstan||14|
|7. Capstan||Tungsten carbide|
|8. Quick dies change||Available|
|9. Main motor||AC 160KW|
|10. Fix speed motor||AC 55KW|
|11. Gear||Not Changeable|
|12. Noises of machine||≤85 db|
|13. Protection cover||Installed|
|14. Gear Oil system||1 set|
IV. Working Environment
4-1. Not more than 1000 meters above sea level.
4-2. Temperature －10℃－40℃
4-3. Relative temperature does not exceed 85% (25 ℃)
V. Lifting the machine, installation, adjustment
5-1. Lifting, there are four lifting rings to lift.
5-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.
5-3. Adjustment, clean all parts, check all the part no loose.
VI. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.