Payment & Shipping Terms:
|Inlet Diameter:||0.8-1.8mm||Outlet Diameter:||0.3-1.0mm|
|Main Motor:||22KW||Spooler Motor:||15KW|
|Product Name:||Non Standard Wire Drawing Machine||After-sale Service:||Engineer Available To Overseas|
|Usage:||Drawing And Annealing||Warranty:||1 Year|
HXE-22DT Fine copper wire drawing machine with Annealing machine & large spooler
HXE-22DT Fine copper wire drawing machine with annealing machine is used to draw and anneal single bare copper wire from 0.8mm-1.8mm to 0.3mm-1.0mm.
II. Main Technical parameters
1. Usage single bare copper wire drawing and annealing
2. Inlet size 0.8mm-1.8mm
3. Outlet size 0.3mm-1.0mm (Elongation of annealed wire 25% to 32%)
4. Machine speed/max 1500m/min
5. Die number 22, Dies size 25mm×8-10mmT, Slip ratio 15%+8%
6. Wire drawing mode standing-mode and 4axes
7. Drive by Inverter control, Brand Inovance, Most widely used brand in drawing machine
8. Main motor 22KW, Spooler motor 15KW, China best brand
9. Annealing voltage DC60V/max, Annealing current DC1000A/max, Annealing power 60KVA
10. Annealing method DC Three section annealing
11. Annealing protection will be done by steam protection
12. Capacity of compressed air 0.4-0.6Mpa, 20L/min
13. Demand Water quantity for annealing and coolant 200L/min
14. Machine frame welded by steel plate
15. Transmission Flat belts
16. Capstan Ceramic plasma
17. Lubricating system Pipe Spray
18. Bobbin size 300mm, loading capacity: 50kg/max
19. Bobbin loading & unloading type shaft type
20. Traversing unit 110W synchros motor, width: 270mm/max
21. Tension control by Air pressure tension control (With Weight balance as Backup)
22. Cabinet 0.8m*0.6m*2.0m
23. Machine dimension 2.3m*1.6m*1.9m; Installation Area 3.3m*1.7m+0.8*0.6m
24. Machine weight 3400KG, Cabinet weight 500KG. In total for shipping around 4,000KG.
|1. Pay-off shelf||1 set|
|2. HXE-22DT Drawing&Annealing machine||1 set|
|3. Electrical control system||1 set|
|4. Steam generator||1 set|
|5. Lubrication Tank and Pump||Optional|
|6. Spare parts||As per List|
|7. Operation Manual, Inverter Manual|
IV. Working Environment
4-1.Not more than 1000 meters above sea level.
4-3.Relative temperature does not exceed 85% (25 ℃)
V. Working Condition
5-1. Maximum air consumption 0.3 cubic meter per minute
5-2. Compress air capacity 225L
5-3. Air pressure 0.4Mpa
5-4. Cooling tank capacity 225L
5-5. Steam capacity 2kg/hour
5-6. Steam pressure 0.2-0.3Mpa
VI. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
(4). DC. three-section annealing
B: After-self service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.