Home ProductsCustomized Wire Drawing Machine

Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission

Certification
Good quality Intermediate Wire Drawing Machine for sales
Customer Reviews
I apologize for the long silence. Just at the time of delivery of the drawing machine, I was on scheduled leave. Now I can say that the drawing machine has already been practically mastered, we produced the first tens of kilometers of wire, from which our products were manufactured and sent to the customer. So everything is OK! Many thanks for your

—— Valery Yastrebov

Hi Eric, How are you doing? After we meet in the Shanghai exhibitionin September, I have not heard from you for a long time?Our cooperation on the exhibition is very nice. wish we can keep in touch for long time ! I hope everything alright! Best Regards,

—— Nagu Nallaiah

a string can even count blessing, give me the most about people. In this season, put my sincere greetings to you, and wish happiness always by your side. The second hand every walk once, is one of my blessing, my friend, you owe me many blessings to play.

—— ViviAn

I'm Online Chat Now

Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission

China Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission supplier
Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission supplier Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission supplier Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission supplier

Large Image :  Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission

Product Details:

Place of Origin: China(Mainland)
Brand Name: HXE
Certification: ISO/SGS
Model Number: 24DTA

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiable
Packaging Details: Packed with plastic film, U-steel under the machine.20GP Container
Delivery Time: 45-60 work days
Payment Terms: T/T, L/C
Supply Ability: 30 sets per year
Contact Now
Detailed Product Description
Inlet Diameter: 0.8mm-1.6mm Outlet Diameter: 0.1mm-0.6mm
Main Motor: AC 3 Phase 18.5KW Annealer Motor: AC 3 Phase 3.7KW
Take Up Motor: AC 3 Phase 3.7KW Product Name: Non Standard Wire Drawing Machine

HXE-24DTA Copper fine wire drawing machine with annealer

 

I. Application

 

      HXE-24DTA Copper fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.1mm-0.6mm.

 

II. Components

 

Name Quantity
1. Pay-off stands  1 set
2. HXE-24DTA main drawing machine 1 set
3. Electrical cabinet 1 set
4. Steam generator Not available
5. Lubrication tank and Pump 1 set
6. Bobbin Loading&Unloading trolley 1 set
7. Spare part for one year 1 set
8. Others  

 
III. Main Technical parameters
 
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.1mm-0.6mm
4. Max. mechanical speed: 2000m/min
5. Dies: 22 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 18.5KW, Inverter control
8. Annealer motor: AC 3 Phase 3.7KW, Inverter control
9. Take up motor: AC 3 Phase 3.7KW, Inverter control
10. Power transmission: Timing belts+Triangle belts+Flat belts
11. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
12. Spool size: Diameter 300mm/Max (Customize), 250mm-127mm spooler is totally ok
13. Capstans: Ceramic plasma, Drawing capstan 242mm, Final capstan 207mm
14. Capstan lubrication: Water pipe spray
15. Traversing: 110W synchronous motor,transmission by flat belts.
16. Brake: 20KG-M Electromagnetic brake
17. Air pressure: 4-6kg/cm2
18. Annealing pulley: Diameter 120mm
19. Annealing volt: DC60V
20. Annealing current: DC800A
21. Annealing motor power: 48KVA
22. Tension control: Annealer & Spooler Tension control by Swing arms, Air pressure auto adjust.
23. Machine dimension(L*W*H): 3500mm*1600mm*2200mm, Machine weight:3200kg
24. Power source: 415V, 50Hz(Customized)

 

IV. Operating procedures

 

4-1.Open power switch

4-2.According to the wire diameter, choose the dies (Check the die list).

4-3.Use pliers to break the wire to get a smaller section.

4-4.Use pliers to make the wire through the dies, then pull the wire out (Use foot switch to make the machine running in a low speed to make the wire move).

4-5.Wire direction, please check the Drawing for Wire path.

4-6.After make the wire through all the parts, close the annealing door and the spooling door, make the tension swing arm in the lowest position. and in running, the balance arm should be in the horizontal line. No big shake, no up and down frequently.

4-7.Open the Annealing switch, open the Pump, open and adjust the Drawing lubrication oil, Cooling water, Steam, Compressed air.

4-8.Set the length meters, then press the Start button to start the machine.

 

V. Attention

 

5-1.If wire breaks, will stop automatically, and the Fault Indicator light will open.

After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.

5-2.Press Emergency Stop button(Red button) to shut down the machine immediately.

After solve, press the button again to run the machine.

5-3.After set the Length-counter, the machine will stop automatically when reach the length set.

After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.

5-4.After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.

5-5.Do not touch the wire in the Annealing section.

5-6.After shut down the machine, need at least 30 seconds to restart the machine.

5-7.Wire often breaks, adjust the speed, balance arm, check the dies are clean or not.

5-8.If has scratch on the surface of the wire, check the capstans on the Take-up part. Check the drawing capstans.

 

Blue Customized Wire Drawing Machine 0.8mm-1.6mm Flat Belts Transmission

Contact Details
Suzhou Hengxie Machinery Co., Ltd

Contact Person: Hengxie

Send your inquiry directly to us (0 / 3000)