Home ProductsWire Annealing Machine

900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance

Good quality Intermediate Wire Drawing Machine for sales
Customer Reviews
I apologize for the long silence. Just at the time of delivery of the drawing machine, I was on scheduled leave. Now I can say that the drawing machine has already been practically mastered, we produced the first tens of kilometers of wire, from which our products were manufactured and sent to the customer. So everything is OK! Many thanks for your

—— Valery Yastrebov

Hi Eric, How are you doing? After we meet in the Shanghai exhibitionin September, I have not heard from you for a long time?Our cooperation on the exhibition is very nice. wish we can keep in touch for long time ! I hope everything alright! Best Regards,

—— Nagu Nallaiah

a string can even count blessing, give me the most about people. In this season, put my sincere greetings to you, and wish happiness always by your side. The second hand every walk once, is one of my blessing, my friend, you owe me many blessings to play.

—— ViviAn

I'm Online Chat Now

900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance

China 900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance supplier
900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance supplier 900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance supplier

Large Image :  900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance

Product Details:

Place of Origin: China(Mainland)
Brand Name: HXE
Certification: ISO/SGS
Model Number: TH400

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Price: Negotiable
Packaging Details: Packed with plastic film, U-steel under the machine.40HQ Container
Delivery Time: 45-60 work days
Payment Terms: T/T, L/C
Supply Ability: 30 sets per year
Contact Now
Detailed Product Description
Usage: Annealing Wire Diameter: 1.7mm-4.2mm
Speed: 900m/min (Adjustable) Annealing Method: DC. Three-section Annealing
Product Name: Wire Annealing Machine After-sale Service: Engineer Available To Overseas

HXE-TH400 Annealer for Aluminium rod breakdown machine


I. Quick description


   Annealer for aluminium rod breakdown machine is used to annealing wire from 1.7mm to 4.2mm.


II. Shipping & Installation


2-1. Shipping

There are two lifting rings on the drawing machine, four on then annealing machine.


2-2. Installation (See attached drawing)

According to the drawing, make the foundation.

When machine is in position, install bolts and adjust the center line.

When concrete is drying, adjust center line again and fix the bolts.


2-3. Adjust

Before adjusting, check and clean all parts.


III. Operation & Maintenance


3-1. Preparation before running

Check all the lubrication parts of the transmission parts.

Check Wire-break Auto stop device, Safety doors.

Check coolant water, Lubrication oil, Steam, Compressed air.

After checking, jogging machine as lower than 5m/s, check all parts again.


3-2. Operation

Connect power.

Prepare the drawing dies.

Prepare the wire pointing and threading.

According to the die list, place the wires on the capstan, wire goes through each layer 2-3 times.

Put wire through the fix speed capstan then through the annealer machine

Annealer machine wire path, please check the Wire path drawing on the machine.

Then put wire through the Wire passing wheels, Tension device, Spooler machine.

After the wire path, close Safety door, adjust Drawing lubrication oil, Coolant water, Steam, Compressed air.


3-3. Diameter, Voltage, Current, Speed linkage

Our machine is made according to use`s elongation requirement, nothing to do with copper wire.


3-4. Maintenance

Lubricate all the parts, make sure all the wheels and capstans run flexible.

After working 1000hours, clean all the bearing and change new lubrication oil.

Annealing contact rings are consuming parts, after using for certain time, when annealing, will have sparks, which means you need change new rings.

There are carbon brushes on the back side of the annealer machine, need change accordingly.


IV. Main technical parameter


1. Usage single bare aluminium wire annealing

2. Applicable wire diameter 1.7mm-4.2mm, Speed 900m/min (Adjustable)

3. Annealing method DC. Three-section annealing

4. Annealing current DC 4000A

5. Annealing voltage DC 60V

6. Tension controller at the beginning of the annealer machine

7. Cleaning device at the end of the drawing machine, before goes to annealer machine

8. Forced air cooling device for annealer

9. Driving by AC 11KW motor

10. Inverter control 11KW

11. Power source Customize

12. Direction Customize

13. Color: Blue or Customize

14. Other details


V. Advantage and after-sale service


A: Advantage


(A1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.

(A2). Body and other key components and parts are produced by our own factory , quality is reliable.

(A3). Our company’s developing process in more than 10 years.

(A4). DC. three-section annealing


B: After-sale service


Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:

(B1) 1 year for mechanical part.

(B2) 6 month for electrical part.


      Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.

1. Due to wrong operation while shipping.

2. Due to Buyer`s wrong preparation that may cause damage to the machine.

3. Due to Buyer`s wrong operation that may cause damage to the machine.

4. Not in the consuming part list.

5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.

6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.

7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.


900m/min Adjustable Aluminium Rod Annealer Customize Power Source Easy Maintenance

Contact Details
Suzhou Hengxie Machinery Co., Ltd

Contact Person: Hengxie

Send your inquiry directly to us (0 / 3000)