Payment & Shipping Terms:
|Annealing Current:||DC 1500A||Annealing Voltage:||DC 55V|
|Annealing Method:||DC. Three-section Annealing||Line Speed:||1200m/min (Adjustable)|
|Driving Motor:||5.5KW||Product Name:||Wire Annealing Machine|
HXE-Continuously Intermediate Copper Wire Annealing Machine
I. Quick details
Continuously Intermediate copper wire annealing machine is used to annealing copper wire from 0.4mm to 1.2mm.
II. Shipping & Installation
There are two lifting rings on the drawing machine, four on then annealing machine.
2-2. Installation (See attached drawing)
According to the drawing, make the foundation.
When machine is in position, install bolts and adjust the center line.
When concrete is drying, adjust center line again and fix the bolts.
Before adjusting, check and clean all parts.
III. Main technical parameter
1. Usage single bare copper wire annealing
2. Applicable wire diameter 0.4mm-1.2mm, Speed 1200m/min (Adjustable)
3. Annealing method DC. Three-section annealing
4. Annealing current DC 1500A
5. Annealing voltage DC 55V
6. Steam quantity 12kg/h
7. Cooling water capacity 400L/min
8. Compressed air capacity 0.4-0.6Mpa, 30L/min
9. Power source Customize
10. Direction Customize
11. Cooling method Water
12. Protection by Steam
13. Driving by AC 5.5KW Motor, Chinese classical brand WN.
14. Inverter control 5.5KW, Classical Brand Inovance
4-1. When installation, make connect the ground wire.
4-2. When working, do not open the doors.
4-3. Do not touch the wire when annealing.
4-4. Regular check Coolant water, Steam, Compressed air.
V. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
(4). DC. three-section annealing
B: After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the machine.
3. Due to Buyer`s wrong operation that may cause damage to the machine.
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.